Digma Pro Hit 104 firmware is the official software that runs on the DIGMA Optima 8305C. DIGMA develops and releases it to provide updates and enhancements to the device’s performance. Firmware updates help resolve issues, introduce fresh features, new security patch, and enhance the overall performance of the device.
Table of Contents
How to Check for Firmware Updates
To check for firmware updates on your Digma Pro Hit 104 , follow these steps:
- Go to the “Settings” menu on your device.
- Scroll down and hit “Software update.”
- Then, just tap “Download and install” to see if there are any updates available.
- If an update is available, follow the on-screen instructions to download and install it.
Download Digma Pro Hit 104 Firmware Here
- Pro_hit_104_hs1005pl_rev1_factory_20231228
- SPD Flash Tool: Link Tool
Note
- Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Must backup NVRAM using this Guide before Doing anything.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.
Important flash Digma Pro Hit 104:
- Make sure to DO NOT root your handset by yourself or without any knowledge. The process may damage the device system and your device warranty will void immediately (if any).
- The firmware updating process will take some time. So, please be patient.
- It may delete all of the device data (internal) completely such as contacts, messages, documents, etc. Make sure to take a full back up of your important data before doing anything.
- Keep the Infinix phone battery juice above 50% or you can plug your device into charging as well.
- Connect your device to a working Wi-Fi network for faster and stable software updates.
Why Need Stock Firmware?
- Downgrade a Phone
- Upgrade a Phone
- Fix some serious issue in phone
- Remove FRP Pattern and Pin lock
- Fix bootloop and software issue on a Phone
- Completely Re-Installation of board software
How to Install Stock Firmware:
- Download and Install SPD Driver on your computer
- Download and Extract Firmware File and Flash tools
- Run SPD Flash tool
- Click load Package
- Now Select Pac file from the downloaded ROM folder
- Click Download/Start Arrow
- Connect Your switched off Phone by pressing volume up & down key
- Wait until success,
- once done, disconnect device & switch it ON