Free Download in gsmxt.com Official DW Q8C1 Firmware Flash File , for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc.
If you own a DW Q8C1 Firmware Flash File Free Download are experiencing issues with its performance, it may be time to consider upgrading its firmware. Firmware is the software that runs on your device and controls its functions. By upgrading your firmware, you can improve the overall performance and stability of your device. In this article, we will discuss the official DW Q8C1 Firmware Flash File Free Download firmware and provide a guide on how to flash it onto your device.
Table of Contents
How to Check for Firmware Updates
To check for firmware updates on your DW Q8C1, follow these steps:
- Go to the “Settings” menu on your device.
- Scroll down and hit “Software update.”
- Then, just tap “Download and install” to see if there are any updates available.
- If an update is available, follow the on-screen instructions to download and install it.
Download Link DW Q8C1 Firmware:
- MT6582_alps_Q8C1_OSv12_V1.0.3_220722_LRX21M_b906_DW
- SP Flashtool : Link here
- DRIVER : Download
Note
- Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Must backup NVRAM using this Guide before Doing anything.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.
How to flash Firmware
- Unpack downloaded Firmware using 7zip
- Install Mediatek Vcom driver on Your computer
- Disable SLA Authentication by following this Guide (if not disabled You may face BROM error)
- Download & Extract smartphone flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too from drop down Select ‘Download only
- Click ‘Download’
- Turn Phone OFF
- Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON