This article will help you Alpine iLX-507A Firmware Update in a detailed manner.
The Alpine iLX-507A is a digital media receiver with a 7-inch capacitive touch screen display. It is designed to work with Apple CarPlay and allows for seamless integration of your iPhone into your car’s dashboard. With Apple CarPlay, you can access your music library, make calls, send and receive messages, and use apps like Maps and Spotify, all through the receiver’s touchscreen interface.
In addition to Apple CarPlay, the iLX-507A also features built-in Bluetooth connectivity, allowing you to stream audio wirelessly from your
Support Model
- Alpine iLX-507A Firmware Update
- Alpine iLX-F509A Firmware Update
- Alpine iLX-F511A Firmware Update
- Alpine i905 Firmware Update
Download Alpine iLX-507A Firmware Update & Guide Here
Caution Alpine iLX-507A Firmware Update
- Do NOT turn off vehicle’s ignition or head unit’s power switch while updating. Some modern vehicles may shut down the ignition (ACC) if the engine is not running for some time. If you are not sure if this applies to your car, leave the engine running while the update is in progress.
- Do NOT remove the USB flash memory while updating. Do NOT press any buttons while updating.
- Do NOT update while driving. Failing to follow any of these cautions could cause damage to the head unit.
Release Notes
- Adds ability to add 2 additional Camera Inputs using KCX-C250MC (sold separately)
- Add USB Media playback functionality to USB2
This firmware update corrects issues with the following:
- Fixes wrong status display of Sub.W Level & Sub.W Phase. iDataLink Climate-
- Fixes Rear Zone operation. iDataLink Climate-
- Fixes temperature display in Celsius. Resolution increase for Maestro fan and temperature climate controls to address a status display issue.
- Power Antenna logic improved to turn On only when the main audio source is set to FM/AM Radio.
How to Alpine iLX-507A Firmware Update
-
Format The Flash Drive
Only flash drives formatted to FAT32 can be read by the head unit. This means that your flash drive can not be formatted to anything else including NTFS, exFAT, Windows the drive can be formatted by right clicking on the drive in file explorer and selecting format as shown in the pictures below.
-
Copy The Audio Update Files To The Flash Drive
Extract the downloaded files using a program like WinZip to your computer. If you don’t have a program that handles zip files on your computer you will need to install extracted you will see a folder named Update. Copy the unzipped folder to your flash drive by copy and pasting or dragging and dropping the file. The pictures below show the folder on the flash drive with the firmware file inside of it. Note: You can NOT change the file names or folder names. The head unit will not recognize the files if you do. DO NOT just copy the files to the drive. You need to copy the folder.
-
Copy The Update Files To The Head Unit
Plug the flash drive into the USB connector of the head unit. The USB extension is typically ran from the back of the head unit to either the glove box or center console areas of the vehicle depending on the original installation. Turn on the vehicle’s ignition to power on the head unit. Do NOT turn off the igntion or the power of the head unit while the system is updating The “Update” screen will automatically pop up. Select “Yes”. The file update preparation portion will start and takes about 2 minutes. The head unit will then reboot.Remove the USB drive. Then go to “Restore Factory Settings” in the about section to do a factory reset.
-
Done Alpine iLX-507A Firmware Update
Supply:
- Upgrading the firmware of your Alpine ILX-507A can be a great way to ensure that your device is running smoothly and taking advantage of the latest features. With each firmware update, Alpine adds new functionality and bug fixes that enhance the user experience
Tools:
- Windows XP / Windows 7 / Windows 8 / Windows 10 / Windows 11 / MacOS
- , Alpine iLX-507A , USB stick with minimum capacity 1 GB (recommended 4GB USB version 3)