Huawei DCO-LX9 Combination Firmware – Unbrick – Huawei ID

gsmxt.com share free Huawei DCO-LX9 Combination Firmware for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc. From this guide, you could download the latest stock firmware for all the Huawei devices

Huawei DCO-LX9 Combination Firmware Download Here

• HUAWEI Mate 50 Pro DCO-LX9 hw ru DCO-L29_103.0.0.158(C10E10R2P1)_Product_Combination_Software_EMUI13.0.0_05019ASD.zipGoogle Drive| Terabox |Mediafile | Androidhost

How to Install Huawei DCO-LX9 Firmware?

can use unlocktool, mrt, hcu ..v

OTG Method:

1. Open the Zip and Extract the dload folder on the Pen drive
2. turn off the Phone
3. connect the Pen-drive to Phone with the OTG cable
4. Press Volume + Volume – & Power button at same time
5. The device itself start Installation Processor, once done it will be rebooted

SDcard Method:

1. Enter the Service menu by dialing * # * # 2846579 # * # *
2. Press Option 4. Software Upgrade
3. Press OPTION 1. Memory Card Upgrade

Note

1. Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.