gsmxt.com share free Huawei DCO-LX9 Firmware for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc. From this guide, you could download the latest stock firmware for all the Huawei devices
Huawei DCO-LX9 Firmware Download Here
- HUAWEI Mate 50 Pro DCO-LX9 hw ru DCO-L29_103.0.0.158(C10E10R2P1)_Product_Combination_Software_EMUI13.0.0_05019ASD.zipGoogle Drive| Terabox |Mediafile | Androidhost
- HUAWEI Mate 50 Pro DCO-LX9 hw ru DCO-L29_103.0.0.126(C10E10R2P1)_Product_Combination_Software_EMUI13.0.0_05019ASD.zipGoogle Drive| Terabox |Mediafile | Androidhost
- HUAWEI Mate 50 Pro DCO-LX9 hw ru DCO-L29 103.0.0.187(C10E10R2P1).zipGoogle Drive| Terabox |Mediafile | Androidhost
How to Install Huawei DCO-LX9 Firmware?
can use unlocktool, mrt, hcu ..v
OTG Method:
- Open the Zip and Extract the dload folder on the Pen drive
- turn off the Phone
- connect the Pen-drive to Phone with the OTG cable
- Press Volume + Volume – & Power button at same time
- The device itself start Installation Processor, once done it will be rebooted
SDcard Method:
- Enter the Service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Software Upgrade
- Press OPTION 1. Memory Card Upgrade
Note
- Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Must backup NVRAM using this Guide before Doing anything.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.
