- 0.1 RELATED POSTS
- 0.2 Samsung Galaxy Tab S7 FE 5G SM-T736B S(Android 12) (BIT 1) Official Full Firmware
- 0.3 Samsung Galaxy Tab Active4 Pro 5G SM-T638U S(Android 12) (BIT 1) Official Full Firmware
- 0.4 Samsung Galaxy A04 SM-A045M S(Android 12) (BIT 1) Official Full Firmware
- 1 Download ROM Huawei P Smart 2019 POT-LX1 Firmware :
Download in gsmxt.com Official Huawei P Smart 2019 POT-LX1 Firmware for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc. From this guide, you could download the latest stock firmware for all the Huawei devices
fix dm-verity verification failed, Red State
But you could now put all these doubts to rest. From this guide, you get to grab hold of the latest stock firmware for all the Huawei devices. Even if the update hasn’t landed onto your device, you could download the same from this post and manually install it. But before we list out the download links, let’s check out the associated advantages that a stock ROM or firmware brings in with itself. Follow along.
Download ROM Huawei P Smart 2019 POT-LX1 Firmware :
C432 hw/eu Version:
- gsmxt.com_POT-LX1 184.108.40.2064(C432E8R4P1) Firmware EMUI9.1.0 05015PRL.rar
Sever Google Drive | Androidfilehost | Terabox
How to Install Firmware?
can use unlocktool, mrt, hcu ..v
- Open the Zip and Extract the dload folder on the Pen drive
- turn off the Phone
- connect the Pen-drive to Phone with the OTG cable
- Press Volume + Volume – & Power button at same time
- The device itself start Installation Processor, once done it will be rebooted
- Enter the Service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Software Upgrade
- Press OPTION 1. Memory Card Upgrade
- Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Must backup NVRAM using this Guide before Doing anything.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.
Important flash Huawei P Smart 2019 POT-LX1 Firmware :
- Make sure to DO NOT root your handset by yourself or without any knowledge. The process may damage the device system and your device warranty will void immediately (if any).
- The firmware updating process will take some time. So, please be patient.
- It may delete all of the device data (internal) completely such as contacts, messages, documents, etc. Make sure to take a full back up of your important data before doing anything.
- Keep the Infinix phone battery juice above 50% or you can plug your device into charging as well.
- Connect your device to a working Wi-Fi network for faster and stable software updates.
Why Need Stock Huawei P Smart 2019 Firmware ?
- Downgrade a Phone
- Upgrade a Phone
- Fix some serious issue in phone
- Remove FRP Pattern and Pin lock
- Fix bootloop and software issue on a Phone
- Completely Re-Installation of board software
- .. etc
Advantages of Stock Huawei P Smart 2019 POT-LX1 Firmware
The first and foremost advantage straight out spells out that you don’t have to wait for the OTA to land on your device. Just take hold of the stock firmware from this post and you are good to go. Furthermore, there is a never-ending battle going on regarding the Custom ROMs vs Stock Firmware. Well, let’s settle that one’s it for all.
Custom ROMs no doubt bring in a couple of extra goodies than what your device might not be shipped with. However, these custom ROMs are usually buggy and might have some stability issues as well. The stock firmware is built keeping your device in mind and hence is customized and optimized according to each device’s unique specs sheet. Therefore, it is capable of providing greater stability and a bug-free experience.
Likewise, owing to Android’s open-source ecosystem, users generally try out a plethora of tweaks and customizations. And if they end up messing up even a single step, it will straight away lead to a bricked or boot-looped device. The only escape route around? Well, all you have to do is just flash the stock firmware onto your Huawei device and your device will be back to normal working condition.
So with a plentitude of benefits associated with these stock ROMs, it could be needed on any day of the week. And in that case, you could easily refer to this guide. From this post, you could download the latest stock firmware for all the Huawei P Smart 2019 POT-LX1 Firmware devices.