Free Download in gsmxt.com Official Meizu 20 Pro Firmware Flash File , for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc.
Meizu 20 Pro Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a Particular device and are not interchangeable between different devices.
Note:
- make a backup before Process
- it will erase all your data Including Internal Storage
- backup Your Personal data
Downloads Links Meizu 20 Pro Firmware:
Full OTA:
- Flyme 10.0.2.0A China: Download
Driver All OPPO – Realme :
- DRIVER OPPO : Download
How to boot:
- MTK Devices: Turn off the power, hold 2 volume up and down buttons to connect the cable
- Qualcomm Devices: Turn off the power, Press volume down and power into recovery mode
-> English -> connect the cable -> Press 4 times on Version 1.2 -> Click OK -> Boot to 9008 EDL Mode
How to Flash Meizu 20 Pro Firmware Via EDL:
- Download and install Mi Flash Tool on your computer. You can download the latest version of Mi Flash Tool from the above download section.
- Download the appropriate Firmware package for your device. Make sure to download the correct firmware package that matches your device model and region
- Extract the firmware package to a folder on your computer
- Install Qualcomm usb driver on your computer, You can download the latest version of qualcomm driver from the above download section.
- Open Mi Flash Tool on your computer.
- Connect your device to your computer using a USB cable. the device must be in 9008 EDL Mod
- In Mi Flash Tool, click on the “SELECT” button and navigate to the folder where you extracted the Firmware package in above step.
- In Mi Flash tool, click on the “REFRESH” button to detect your device.
- Once your device is detected, click on the “Flash” button in Mi Flash Tool to start the firmware flashing process.
- Wait for the firmware flashing process to complete. Do not disconnect your device from the computer during this process.
