• https://aceh.lan.go.id/wp-content/giga/
  • https://figmmg.unmsm.edu.pe/file/
  • https://figmmg.unmsm.edu.pe/files/
  • https://figmmg.unmsm.edu.pe/mail/
  • https://ppid.lamongankab.go.id/pay/
  • https://ppid.lamongankab.go.id/wp-content/giga/
  • https://rsudngimbang.lamongankab.go.id/
  • https://dasboard.lamongankab.go.id/
  • https://dpmd.bengkaliskab.go.id/plugins/
  • https://dpmd.bengkaliskab.go.id/storage/
  • https://islamedia.web.id/
  • https://fai.unuha.ac.id/disk/
  • https://fai.unuha.ac.id/post/
  • https://fai.unuha.ac.id/plugins/
  • https://fai.unuha.ac.id/draft/
  • https://fai.unuha.ac.id/giga/
  • slot gacor hari ini
  • slot pulsa
  • slot pulsa
  • nuri77
  • gemilang77
  • slot deposit pulsa
  • slot gacor hari ini
  • slot luar negeri
  • slot pulsa
  • situs toto
  • situs toto
  • toto slot
  • slot pulsa tanpa potongan
  • situs toto
  • situs toto
  • slot pulsa
  • situs toto slot
  • slot deposit pulsa
  • Situs toto macau
  • Samsung Galaxy A01 (SM-A015M) 10 Official Firmware

    Samsung Galaxy A01 (SM-A015M) 10 Official Firmware

    Samsung Galaxy A01 (SM-A015G) 10 (Android Q) Official Firmware

    Free Download in gsmxt.com Samsung Galaxy A01 (SM-A015M) 10 Android Q Official Firmware  , for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc.

    To repair damage to software, you can do a factory reset, if you can’t do it with factory reset, you can flash it, and how to flash, can with Odin or other Samsung Flasher

    Download Full Firmware Samsung A01 (SM-A015M):

    How to Flash Firmware by Odin

    Download Odin :

    To enter recovery mode, following these steps:

    1. Power off your Samsung phone. 
    2.  Reboot Samsung phone in Download Mode (hold Home + Power + Volume Down buttons / hold Volume Down + Bixby buttons then plug-in cable)

       

    3.  Connect you Samsung phone and wait until you get a blue sign in Odin

       

    4.  Add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it’s slots

       

    5.  Make sure re-partition is NOT ticked

       

    6. Click the START button, sit back and wait few minutes

    Exit mobile version