Download Free Tecno CK6n Firmware Flash File – Stock ROM

Tecno CK6n Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.

Note:

• Must Make a backup before process
• it will erase all your data Including Internal storage

Download Links Tecno CK6n Firmware:

• CK6n-H6929CD-T-OP-230331V1191: Download

Driver All OPPO – Realme :

• DRIVER : Download

How to boot:

• MTK Devices: Turn off the power, hold 2 volume up and down buttons to connect the cable
• Qualcomm Devices: Turn off the power, Press volume down and power into recovery mode
  -> English -> connect the cable -> Press 4 times on Version 1.2 -> Click OK -> Boot to 9008 EDL Mode

Note

1. Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.

How to Flash Tecno CK6n Firmware Via SP Flash tool:

• unpack downloaded Firmware using 7zip
• Install Mediatek Vcom driver on Your computer
• disable SLA Authentication
• Download & Extract smartphone flash
• from the flash tool folder Run flash_tool.exe
• set connection like below image (option/connection)
• Go to Download tab Click Scatter and Load Scatter File from ROM folder
• Repeat Process and load DA and Auth file too
• turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
• You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON