• https://aceh.lan.go.id/wp-content/giga/
  • https://figmmg.unmsm.edu.pe/file/
  • https://figmmg.unmsm.edu.pe/files/
  • https://figmmg.unmsm.edu.pe/mail/
  • https://ppid.lamongankab.go.id/pay/
  • https://ppid.lamongankab.go.id/wp-content/giga/
  • https://rsudngimbang.lamongankab.go.id/
  • https://dasboard.lamongankab.go.id/
  • https://dpmd.bengkaliskab.go.id/plugins/
  • https://dpmd.bengkaliskab.go.id/storage/
  • https://islamedia.web.id/
  • https://fai.unuha.ac.id/disk/
  • https://fai.unuha.ac.id/post/
  • https://fai.unuha.ac.id/plugins/
  • https://fai.unuha.ac.id/draft/
  • https://fai.unuha.ac.id/giga/
  • slot gacor hari ini
  • slot pulsa
  • slot pulsa
  • nuri77
  • gemilang77
  • slot deposit pulsa
  • slot gacor hari ini
  • slot luar negeri
  • slot pulsa
  • situs toto
  • situs toto
  • toto slot
  • slot pulsa tanpa potongan
  • situs toto
  • situs toto
  • slot pulsa
  • situs toto slot
  • slot deposit pulsa
  • Situs toto macau
  • Tecno Spark 10 Ki5q Firmware Flash File - Download Stock ROM

    Tecno Spark 10 Ki5q Firmware Flash File – Download Stock ROM

    Tecno Spark 10 Ki5q Firmware Flash File - Download Stock ROM

    Tecno Spark 10 Ki5q Firmware Flash File - Download Stock ROM

    Free Download in gsmxt.com Official Tecno Spark 10 Ki5q Firmware Flash File , for Unbrick Dead after Flash, Repair Stuck on Logo, Screen Unlock, Pattern Unlock, FRP (Factory Reset Protection) / Google Account, etc.
    Tecno Spark 10 Ki5q Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.

    Download Link Tecno Spark 10 Ki5q Firmware:

    Note
    1. Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
    2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
    3. Must backup NVRAM using this Guide before Doing anything.
    4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental ShutDown.

    How to flash Firmware

    1. Unpack downloaded Firmware using 7zip  
    2. Install Mediatek Vcom driver on Your computer  
    3. Disable SLA Authentication by following this Guide (if not disabled You may face BROM error)  
    4. Download & Extract smartphone flash tools on your computer  
    5. From the flash tool folder Run flash_tool.exe  
    6. Go to Download tab Click Scatter and Load Scatter File from ROM folder  
    7. Repeat Process and load DA and Auth file too from drop down Select ‘Download only  
    8. Click ‘Download’  
    9. Turn Phone OFF  
    10. Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
    11. You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

    Important flash Tecno Spark 10 Ki5q Firmware:

    Exit mobile version